跳到主要內容區
064464

學術著作

學術著作列表

A. 期刊論文(Journal Papers):
1. J. J. Wu and C. Y. Chiang, 2018, Vibration of a rectangular plate due to moving loads by using moving four-degree-of-freedom spring-damper-mass-element, Journal of Taiwan Society of Naval Architects and Marine Engineers, Vol.37, No.3, pp.137-150.
 
2. J. J. Wu, 2017, Study on the exact solution for natural frequencies and mode shapes of the longitudinal-vibration conic rod carrying arbitrary concentrated elements, International Journal of Engineering and Applied Sciences, Vol. 4, Issue 7, pp. 105-116, NSC 102-2221-E-022-007.
 
3. J. J. Wu, 2017, A study on vibration reduction of the torsional-vibration responses of a uniform beam subjected to an eccentric moving force, International Journal of New Technology and Research, Vol. 3, Issue 8, pp. 25-34, NSC 98-2221-E-022-015.
 
4. J. J. Wu, 2015, Dynamic analyses of a flat plate and a beam subjected to a moving load, International Journal of Engineering Research and Science, Vol. 1, Issue 8, pp. 1-19, MOST 104-2221-E-022-012.
 
5. J. J. Wu, 2014, Free vibration analysis of a rigid bar supported by arbitrary elastic beams, Journal of Applied Mathematical Modelling, Vol. 38, pp. 1969-1982, NSC 97-2628-E-022 -002. (SCI)
 
6. J. J. Wu, F. Y. Chen and T. H. Hsieh, 2014, Use of computer animation for displaying the mode shapes of a three-dimensional framework, Jordan Journal of Applied Science (ISSN 1605-2587) , Vol. 12, pp. 17-32.
 
7. J. J. Wu, 2013, Dynamic analysis of a beam subjected to an eccentric rolling disk, Journal of Structural Engineering and Mechanics, Vol. 47, pp. 455-470, NSC 96-2628-E-022-001. (SCI)
 
8. C. H. Lien, J. J. Wu, I. Penesis, H. Sniegocki and W. J. Chang, 2013, Marine Engineering and Applications, Mathematical Problems in Engineering, Vol. 2013, Article ID 761083, 2 pages. (SCI)
 
9. J. J. Wu, 2013, Torsional vibrations of a conic shaft with opposite tapers carrying arbitrary concentrated elements, Mathematical Problems in Engineering, Vol. 2013, Article ID 491062, 19 pages, NSC 101-2221-E-022-002. (SCI)
 
10. J. J. Wu, 2011, Use of the elastic-and-rigid-combined beam element for dynamic analysis of a two-dimensional frame with arbitrarily distributed rigid beam segments, Journal of Applied Mathematical Modelling, Vol. 35, pp. 1240-1251, NSC 95-2221-E-022-015. (SCI)
 
11. J. J. Wu, 2010, Dynamic responses of a beam composed of multiple elastic and rigid beam segments subjected to moving loads, Engineering Science & Technology Bulletin, Vol. 108, pp. 202-206, National, Science Council, NSC 96-2628-E-022-001.
 
12. J. J. Wu, 2010, Free vibration analysis of a beam with arbitrarily distributed rigid beam segments using elastic-and-rigid-combined beam element, Journal of Structural Engineering and Mechanics, Vol. 34, pp. 805-808, NSC 95-2221-E-022-015. (SCI)
 
13. J. J. Wu and Y. C. Liang, 2009, Vibration reduction of a damped structural system subjected to multiple external loadings, Journal of Applied Sound and Vibration, Vol. 1, No. 1, pp. 39-49.
 
14. J. J. Wu, 2008, Transverse and longitudinal vibrations of a structure due to a moving load using moving finite element, International Journal of Mechanical Sciences, Vol. 50, pp. 613-625. (SCI)
 
15. J. J. Wu, 2008, Free vibration analysis of a uniform beam carrying multiple spring-mass systems with mass of the springs considered, Journal of Structural Engineering and Mechanics, Vol. 28, No. 6, pp. 659-676. (SCI)
 
16. J. J. Wu, 2008, Use of moving substructure element for vibration analyses of a structure due to a moving trolley carrying a swinging mass, Journal of Structural Engineering and Mechanics, Vol. 28, No. 4, pp. 491-494. (SCI)
 
17. J. J. Wu, 2007, Torsional vibration analyses of a damped shafting system using tapered shaft element, Journal of Sound and Vibration, Vol. 306, pp. 946-954. (SCI)
 
18. J. J. Wu, 2007, Prediction of lateral vibration characteristics of a full-size rotor-bearing system by using those of its scale models, Finite Elements in Analysis and Design, Vol. 43, pp. 803-816, NSC 94-2611-E-022-002. (SCI)
 
19. J. J. Wu, 2007, Use of moving distributed mass element for the dynamic analysis of a flat plate undergoing a moving distributed load, International Journal for Numerical Methods in Engineering, Vol. 71, pp. 347-362. (SCI)
 
20. J. J. Wu, 2007, Vibration analyses of an inclined flat plate subjected to moving loads, Journal of Sound and Vibration, Vol. 299, pp. 373-387. (SCI)
 
21. J. J. Wu, 2006, Study on the inertia effect of helical spring of the absorber on suppressing the dynamic responses of a beam subjected to a moving load, Journal of Sound and Vibration, Vol. 297, pp. 981-999. (SCI)
 
22. J. J. Wu, 2006, Finite element analysis and vibration testing of a three-dimensional crane structure, Journal of Measurement, Vol. 39, No. 8, pp. 740-749. (SCI)
 
23. J. J. Wu, 2006, Prediction of the dynamic characteristics of an elastically supported full-size flat plate from those of its complete-similitude scale model, Computers & Structures, Vol. 84, No. 3-4, pp. 102-114, NSC 92-2611-E-022-002. (SCI)
 
24. J. J. Wu, 2006, Use of equivalent mass method for free vibration analyses of a beam carrying multiple two-dof spring-mass systems with inertia effect of the helical springs considered, International Journal for Numerical Methods in Engineering, Vol. 65, No. 5, pp. 653-678. (SCI)
 
25. J. J. Wu, 2006, Free vibration characteristics of a rectangular plate carrying multiple three-degree-of-freedom spring-mass systems using equivalent mass method, International Journal of Solids and Structures, Vol. 43, No. 3-4, pp. 727-746. (SCI)
 
26. J. J. Wu, 2005, Use of equivalent spring method for free vibration analyses of a rectangular plate carrying multiple three-degree-of-freedom spring-mass systems, Journal of Structural Engineering and Mechanics, Vol. 21, No. 6, pp. 713-735. (SCI)
 
27. J. J. Wu, 2005, Dynamic analysis of an inclined beam due to moving loads, Journal of Sound and Vibration, Vol. 288, pp. 107-131. (SCI)
 
28. J. J. Wu, 2005, Dynamic analysis of a rectangular plate under a moving line load using scale beams and scaling laws, Computers & Structures, Vol. 83, pp. 1646-1658, NSC 91-2611-E-022-002. (SCI)
 
29. J. J. Wu, 2005, Vibration analyses of a portal frame under the action of a moving distributed mass using moving mass element, International Journal for Numerical Methods in Engineering, Vol. 62, No. 14, pp. 2028-2052. (SCI)
 
30. J. J. Wu, 2005, Use of equivalent-damper method for free vibration analysis of a beam carrying multiple two degree-of-freedom spring-damper-mass systems, Journal of Sound and Vibration, Vol. 281, No. 1-2, pp. 275-293. (SCI)
 
31. J. J. Wu, 2004, Finite element modelling and experimental modal testing of a three-dimensional framework, International Journal of Mechanical Sciences, Vol. 46, Issue 8, pp. 1245-1266. (SCI)
 
32. J. J. Wu, 2004, Dynamic responses of a three-dimensional framework due to a moving carriage hoisting a swinging object, International Journal for Numerical Methods in Engineering, Vol. 59, Issue 13, pp. 1679-1702. (SCI)
 
33. J. J. Wu, 2004, Free vibration analysis of beams carrying a number of two degree-of-freedom spring-damper-mass systems, Finite Elements in Analysis and Design, Vol. 40, No. 4, pp. 363-381. (SCI)
 
34. J. J. Wu, 2003, The complete-similitude scale models for predicting the vibration characteristics of the elastically restrained flat plates subjected to dynamic loads, Journal of Sound and Vibration, Vol. 268, No. 5, pp. 1041-1053, NSC 92-2611-E-022-002. (SCI)
 
35. J. J. Wu, 2003, Vibration of a rectangular plate undergoing forces moving along a circular path, Finite Elements in Analysis and Design, Vol. 40, No. 1, pp. 41-60. (SCI)
 
36. J. J. Wu, 2003, Use of equivalent beam models for the dynamic analyses of beamplates under moving forces, Computers & Structures, Vol. 81, No. 30-31, pp. 2749-2766, NSC 91-2611-E-022-002. (SCI)
 
37. J. J. Wu, 2003, Use of effective stiffness matrix for the free vibration analyses of a non-uniform cantilever beam carrying multiple two degree-of-freedom spring-damper-mass systems, Computers & Structures, Vol. 81, No. 24-25, pp. 2319-2330. (SCI)
 
38. J. J. Wu, 2003, Dynamic analysis of a rectangular plate subjected to multiple forces moving along a circular path, Journal of Sound and Vibration, Vol. 260, No. 2, pp. 369-387. (SCI)
 
39. J. J. Wu, 2002, Alternative approach for free vibration of beams carrying a number of two degree-of-freedom spring-mass systems, ASCE Journal of Structural Engineering, Vol. 128, Issue 12, pp. 1604-1616. (SCI)
 
40. J. J. Wu, M. P. Cartmell and A. R. Whittaker, 2002, Prediction of the vibration characteristics of a full-size structure from those of a scale model, Computers & Structures, Vol. 80, No. 18-19, pp. 1461-1472. (SCI)
 
41. J. J. Wu, A. R. Whittaker and M. P. Cartmell, 2001, Dynamic responses of structures to moving bodies using combined finite element and analytical methods, International Journal of Mechanical Sciences, Vol. 43, No. 11, pp. 2555-2579. (SCI)
 
42. J. J. Wu, A. R. Whittaker and M. P. Cartmell, 2000, The use of finite element techniques for calculating the dynamic response of structures to moving load, Computers & Structures, Vol. 78, No. 6, pp. 789-799. (SCI)
 
43. J. J. Wu and A. R. Whittaker, 1999, The natural frequencies and mode shapes of a uniform cantilever beam with multiple two-dof spring-mass systems, Journal of Sound and Vibration, Vol. 227, No. 2, pp. 361-381. (SCI)
 
44. S. Y. Hu, W. X. Zheng, J. J. Wu, X. M. Zhu, R. M. Wei, Y. C. Cai, 2004, Investigation on advanced power magnetic transmission system, Journal of Naval Academy, Vol. 23, No. 4, pp. 41-46.
 
B. 研討會論文(Conference papers):
(a) International Conference Papers:
1. J. J. Wu, 28-29 January, 2016, Numerical simulation of a three-dimensional framework under the action of two-dimensional moving loads,18th International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, Dubai, UAE, MOST 104-2221-E-022-012.
 
2. J. J. Wu, 11-12 February, 2015, Prediction of the torsional vibration characteristics of a rotor-shaft system using its scale model and scaling laws,International Conference on Mechanical, Aeronautical and Manufacturing Engineering 2015, Rio de Janeiro, Rep?blica Federativa do Brasil, NSC 94-2611-E-022-002.
 
3. J. J. Wu, 6-11 July, 2014, Moving-load-induced vibration of a multibody beam composed of elastic and rigid beam segments, European Nonlinear Dynamics Conference (ENOC 2014), Vienna, Republic of Austria, NSC 96-2628-E-022-001.
 
4. J. J. Wu, 14-16 April, 2014, Computer animation of structural mode shapes, The 4th International Conference on Multimedia Computing and Systems (ICMCS 2014), Marrakesh, Morocco.
 
5. J. J. Wu and A. J. Hsieh, 20-24 January, 2014, Computer simulation of very large floating structures, Alaska Marine Science Symposium 2014, Anchorage, Alaska, USA.
 
6. J. J. Wu, S. S. Leu and F. Y. Chen, 9-12 September, 2013, Use of multiple tuned mass dampers for vibration reduction of a rectangular plate subjected to external dynamic loadings, 27th Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2013), Keelung, Taiwan.
 
7. J. J. Wu, May 6-17, 2013, Dynamic analyses of a flat plate and a beam subjected to a moving load, 2013 International School and Workshop on Advanced Computational and Experimental Techniques in Nonlinear Dynamics, Cusco, Peru.
 
8. J. J. Wu, T. H. Hsieh and F. Y. Chen, 27-28 March 2013, Use of computer animation for displaying the mode shapes of a three-dimensional framework, The fifth International Conference on Computer Science and Information Technology, Amman, Jordan.
 
9. J. J. Wu, 20-23 November 2012, Optimal parameters of a two degree-of-freedom vibration absorber for suppressing the torsional-vibration responses of a uniform beam subjected to an eccentric moving force, Dynamics Days South America 2012, International Conference, Cartagena, Colombia, NSC 98-2221-E-022-015.
 
10. J. J. Wu, S. S. Leu, F. Y. Chen and A. L. Yu, 10-12 December 2012, Dynamic analyses of lateral vibration characteristics of a full-size rotor-bearing system by using those of its scale models, Advanced Maritime Engineering Conference, Taipei, Taiwan.
 
11. J. J. Wu, T. H. Hsieh and A. L. Yu, 20-24 November 2012, Coupled torsional-and-lateral vibrations of a propulsive shafting system, Proceedings of Second East Asia International Student Symposium on Maritime Sciences, Kobe, Japan.
 
12. J. J. Wu, 7-9 December 2011, Dynamic analysis of a two-dimensional frame with arbitrary distributed elastic and rigid beam segments, International Science & Technology Conference 2011, Istanbul, Turkey, Paper no. C2B919, NSC 96-2628-E-022-001.
 
13. J. J. Wu and N. S. Yeh, 25 October 2011, Use of a moving spring-damper-mass element for dynamic analysis of an elastically supported beam subjected to moving loads, Proceedings of the 3rd Cross-Strait Conference on Ocean Engineering and Maritime Technology 2011, Kaohsiung, Taiwan, pp. 332-338.
 
14. J. J. Wu and B. C. Wang, 25 October 2011, Use of a rotational absorber for suppressing the torsional vibration responses of a structure, Proceedings of the 3rd Cross-Strait Conference on Ocean Engineering and Maritime Technology 2011, Kaohsiung, Taiwan, pp. 339-345.
 
15. J. J. Wu and K. T. Hsweh, 25 October 2011, Use of a moving spring-damper-mass element for dynamic analysis of a flat plate subjected to moving loads, Proceedings of the 3rd Cross-Strait Conference on Ocean Engineering and Maritime Technology 2011, Kaohsiung, Taiwan, pp. 369-374.
 
16. J. J. Wu and E. C. Yang, 25 October 2011, Dynamics analysis of a hybrid beam, Proceedings of the 3rd Cross-Strait Conference on Ocean Engineering and Maritime Technology 2011, Kaohsiung, Taiwan, pp. 386-391.
 
17. J. J. Wu and C. L. Hung, 12 April 2010, Use of Equivalent-Mass method for calculating the free vibration characteristics of a rectangular plate carrying multiple three degree-of-freedom spring-mass systems, Proceedings of 2010 Cross-Strait Conference on Marine Technology and Port Logistics Development, Kaohsiung, Taiwan.
 
18. J. J. Wu and C. F. Ho, 12 April 2010, Use of optimum parameters of a two degree-of-freedom vibration absorber for suppressing the torsional-vibration responses of a uniform beam subjected to an eccentric harmonic dynamic load, Proceedings of 2010 Cross-Strait Conference on Marine Technology and Port Logistics Development, Kaohsiung, Taiwan.
 
19. K. W. Yu, J. J. Wu, Y. Z. Chang and X. C. Chen, 18-20 December 2009, The study of represented ship motion by using stewart platform, Proceedings of 2nd International Conference on Ocean Engineering and Maritime Technology (OEMT 2009), Xiamen, China.
 
20. J. J. Wu, C. F. Ho and Y. S. Pao, November 2-3 2009, Optimization of a two degree-of-freedom vibration absorber for suppressing the torsional motions of a structure, International Symposium on Marine Science and Technology 2009, Kaohsiung, Taiwan, pp. 100-105.
 
21. J. J. Wu and F. S. Wu, November 2-3 2009, Use of tapered shaft element for vibration analyses of a damped shafting system, International Symposium on Marine Science and Technology 2009, Kaohsiung, Taiwan, pp. 106-112.
 
22. J. J. Wu and C. L. Hung, November 2-3 2009, Vibration analyses of a rectangular plate carrying multiple three-degree-of-freedom spring-mass systems, International Symposium on Marine Science and Technology 2009, Kaohsiung, Taiwan, pp. 120-127.
 
23. J. J. Wu and T. J. Chen, November 2-3 2009, Dynamic analysis of beams carrying a number of spring-damper-mass systems, International Symposium on Marine Science and Technology 2009, Kaohsiung, Taiwan, pp. 113-119.
 
24. J. J. Wu and H. S. Chen, 25 December 2007, Similitude analysis of a rotor-bearing system, Proceedings of 2007 Cross-Strait Conference on Shipping Technology and Fishery, Kaohsiung, Taiwan, Paper no. B1-3.
 
25. J. J. Wu, H. S. Chen and C. F. Ho, 25 December 2007, Use of Holzer method for calculating the natural frequencies and mode shapes of a propulsive shafting system, Proceedings of 2007 Cross-Strait Conference on Shipping Technology and Fishery, Kaohsiung, Taiwan, Paper no. B2-3.
 
26. J. J. Wu, November 5-9 2007, Torsional vibration analyses of a tapered shaft system, International Conference on Maritime Technology, Taipei, Taiwan, pp. 109-115. 
 
27. J. J. Wu, A. R. Whittaker and M. P. Cartmell, 5-7 September 2000, Vibration response of a three-dimensional framework due to transverse and longitudinal motions of a two-dimensional substructure, Proceedings of the 4th International Conference on Modern Practice in Stress and Vibration Analysis, Nottingham, UK, pp. 419-430.
 
(b) National Conference Papers:
1. J. J. Wu and D. Y. Gu, May 2017, Transverse vibration analyses of a motor shaft carrying multiple rigid rotors, Maritime Information and Technology Conference 2017, Kaohsiung, Taiwan.
 
2. J. J. Wu, C. H. Wei and S. F. Shu, March 2017, Use of the vibration characteristics of a scale propulsive shafting system to predict the thrust of a full-size propulsive shafting system, Proceedings of the 29th National Conference on Naval Architecture and Marine Engineering, Tainan, Taiwan, MOST 104-2221-E-022-012.
 
3. J. J. Wu, D. Y. Gu, C. H. Wei and S. F. Shu, March 2017, Study on vibration and abnormal sound diagnosis techniques of shafting systems, Proceedings of the 29th National Conference on Naval Architecture and Marine Engineering, Tainan, Taiwan, MOST 104-2622-E-022-003-CC3.
 
4. J. J. Wu and C. H. Hsiao, May 2016, Study on the Improvement of Ship Cabin Noise, Maritime Information and Technology Conference 2016, Kaohsiung, Taiwan.
 
5. J. J. Wu and T. H. Lee, May 2016, Noise Measurement and Analysis of Ship Cabins, Maritime Information and Technology Conference 2016, Kaohsiung, Taiwan.
 
6. J. J. Wu and T. L. Tsai, May 2016, The Research of MarineCoating for Ships, Maritime Information and Technology Conference 2016, Kaohsiung, Taiwan.
 
7. J. W. Liu and J. J. Wu, 11-12 December 2015, A study on application of matrix condensation technique to structural static analysis, Proceedings of the 32th National Conference on Mechanical Engineering, Kaohsiung, Taiwan.
 
8. J. C. Shih and J. J. Wu, 15 May 2015, Study on the dynamic characteristics of a uniform shaft carrying a number of elastically-mounted rotors, Maritime Information and Technology Conference 2015, Kaohsiung, Taiwan.
 
9. J. J. Wu, F. T. Lin et al., March 2015, A study on transverse-and-bending-coupled vibration characteristics of a propulsive shafting system, Proceedings of the 27th National Conference on Naval Architecture and Marine Engineering, Kaohsiung, Taiwan.
 
10. J. J. Wu, Q. C. Shih, F. Y. Chen and W. L. Hong, March 2015, Study on the exact solution for natural frequencies and mode shapes of the longitudinal-vibration conic rod carrying arbitrary concentrated elements, Proceedings of the 27th National Conference on Naval Architecture and Marine Engineering, Kaohsiung, Taiwan, NSC 102-2221-E-022-007.
 
11. J. J. Wu, F. Y. Chen and A. L. Yu, 15-16 March 2014, Analytical solution for free torsional vibrations of a conical shafting system with opposite tapers and carrying arbitrary concentrated elements, Proceedings of the 26th National Conference on Naval Architecture and Marine Engineering, Keelung, Taiwan, NSC 101-2221-E-022-002.
 
12. J. J. Wu, F. Y. Chen and Y. C. Liang, 15-16 March 2014, A study on design automation of a propulsive shafting system, Proceedings of the 26th National Conference on Naval Architecture and Marine Engineering, Keelung, Taiwan.
 
13. J. J. Wu, F. Y. Chen and Y. C. Liang, 25 April 2014, A study on shaft design rules, Maritime Information and Technology Conference 2014, Kaohsiung, Taiwan.
 
14. J. J. Wu, F. Y. Chen and A. L. Yu, March 2013, Analytical solution for free torsional vibrations of a conical shafting system with opposite tapers and carrying arbitrary concentrated elements, Proceedings of the 26th National Conference on Naval Architecture and Marine Engineering, Tainan, Taiwan, NSC 101-2221-E-022-002.
 
15. J. J. Wu and A. L. Yu, 9 May 2013, A study on similitude of a full-size beam structure system and its scale model, Maritime Information and Technology Conference 2013, Kaohsiung, Taiwan.
 
16. J. J. Wu, C. C. Chen and A. L. Yu, 16-17 March 2013, Use of three-degree-of-freedom spring-damper-mass absorber for suppressing the torsional-and-bending-coupled vibration responses of a rectangular flat plate subjected to distributed dynamic loads, Proceedings of the 25th National Conference on Naval Architecture and Marine Engineering, Tainan, Taiwan, NSC 100-2221-E-022-003.
 
17. J. J. Wu and F. Y. Chen, 7-8 December 2012, Use of scaling laws and scaling factors for predicting the free vibration characteristics of a full-size rotor-bearing system, Proceedings of the 29th National Conference on Mechanical Engineering, Kaohsiung, Taiwan, Paper no.1024.
 
18. J. J. Wu and A. L. Yu, 7-8 December 2012, Dynamic analyses of a propulsive shafting system, Proceedings of the 29th National Conference on Mechanical Engineering, Kaohsiung, Taiwan, Paper no. 1025.
 
19. J. J. Wu and C. Y. Chiag, 7-8 December 2012, Vibration a rectangular plate due to moving loads by using moving four-degree-of-freedom spring-damper-mass element, Proceedings of the 29th National Conference on Mechanical Engineering, Kaohsiung, Taiwan, Paper no. 1157.
 
20. J. J. Wu and C. C. Liu, 7-8 December 2012, Use of moving four-degree-of-freedom spring-damper-mass element for the vibration analyses of a beam subjected to moving loads, Proceedings of the 29th National Conference on Mechanical Engineering, Kaohsiung, Taiwan, Paper no. 1156.
 
21. J. J. Wu and A. L. Yu, 10 May 2012, Vibration characteristics of an eccentric propulsive shafting system, Maritime Information and Technology Conference 2012, Kaohsiung, Taiwan.
 
22. J. J. Wu and K. T. Hsweh, 10 May 2012, Dynamic analyses of a flat plate subjected to a moving spring-damper-mass system, Maritime Information and Technology Conference 2012, Kaohsiung, Taiwan.
 
23. J. J. Wu and N. S. Yeh, 10 May 2012, Dynamic analyses of a beam subjected to a moving spring-damper-mass system, Maritime Information and Technology Conference 2012, Kaohsiung, Taiwan.
 
24. J. J. Wu and E. C. Yang, 10 May 2012, Dynamic analyses of an elastic-and-rigid-combined beam, Maritime Information and Technology Conference 2012, Kaohsiung, Taiwan, NSC 95-2221-E-022-015.
 
25. J. J. Wu and C. C. Chen, 10 May 2012, A study on vibration reduction efficiency of a three degree-of-freedom vibration absorber, Maritime Information and Technology Conference 2012, Kaohsiung, Taiwan, NSC 100-2221-E-022-003.
 
26. J. J. Wu and B. C. Wang, 10 May 2012, A study on vibration reduction efficiency of a rotational vibration absorber, Maritime Information and Technology Conference 2012, Kaohsiung, Taiwan, NSC 99-2221-E-022-014.
 
27. J. J. Wu and C. C. Chen, 4 May 2012, Dynamic analyses of a beam with multiple two degree-of-freedom spring-mass systems, Proceedings of the 14th National Conference on Undersea Technology, Kaohsiung, Taiwan.
 
28. J. J. Wu and B. C. Wang, 4 May 2012, A study on vibration reduction efficiency of a two degree-of-freedom vibration absorber, Proceedings of the 14th National Conference on Undersea Technology, Kaohsiung, Taiwan, NSC 98-2221-E-022 -015.
 
29. J. J. Wu, B. C. Wang and C. C. Chen, 10-11 March 2012, Use of rotational vibration absorber for suppressing the torsional and bending vibration responses of a beam subjected to eccentric distributed harmonic forces, Proceedings of the 24th National Conference on Naval Architecture and Marine Engineering, NSC 99-2221-E-022-014.
 
30. J. J. Wu and C. C. Chen, 10-11 December 2011, Use of a three degree-of-freedom spring-damper-mass absorber for suppressing the vibration responses of a rectangular flat plate, Proceedings of the 28th National Conference on Mechanical Engineering, Taiwan, Paper no. C09-006, NSC 100-2221-E-022-003.
 
31. J. J. Wu, B. C. Wang and A. L. Yu, 10-11 December 2011, Suppression of structural responses with a rotational absorber, Proceedings of the 28th National Conference on Mechanical Engineering, Taiwan, Paper no. B10-010, NSC 99-2221-E-022-014.
 
32. J. J. Wu, B. C. Wang and C. F. Ho, 21 April 2011, Suppression on the torsional-vibration responses of a beam by means of a two-dof vibration absorber, Maritime Information and Technology Conference 2011, Kaohsiung, Taiwan, NSC 98-2221-E-022 -015.
 
33. J. J. Wu, C. C. Chen and B. G. Yu, 21 April 2011, Vibration Characteristics of a beam with any number of two-dof spring-mass system, Maritime Information and Technology Conference 2011, Kaohsiung, Taiwan.
 
34. J. J. Wu, C. F. Ho and R. J. Tsaid, 5-6 March 2011, Use of optimum parameters of a two degree-of-freedom vibration absorber for suppressing the torsional-vibration responses of a uniform beam subjected to an eccentric moving force, Proceedings of the 23rd National Conference on Naval Architecture and Marine Engineering, Kaohsiung, Taiwan, NSC 98-2221-E-022 -015.
 
35. J. J. Wu, T. L. Yang and H. T. Chi, 10-11 December 2010, Prediction of the torsional vibration characteristics of a damped rotor-shaft system from those of its scale model, Proceedings of the 27th National Conference on Mechanical Engineering, Taipei, Taiwan, Paper no. CC04-004.
 
36. J. J. Wu, T. J. Chen and C. F. Ho, 7 May 2010, Free vibration analysis of beams carrying a number of two-degree-of-freedom spring-damper-mass systems, Proceedings of the 12th National Conference on Undersea Technology, Tainan, Taiwan.
 
37. J. J. Wu, F. S. Wu and R. J. Tsaid, 7 May 2010, Torsional vibration analyses of a damped shafting system using tapered shaft element, Proceedings of the 12th National Conference on Undersea Technology, Tainan, Taiwan.
 
38. J. J. Wu, C. F. Ho and Y. H. Liu, 6-7 March 2010, Free vibration analyses of an eccentric rigid body supported by multiple elastic beams, Proceedings of the 22nd National Conference on Naval Architecture and Marine Engineering, Taiwan, NSC 97-2628-E-022 -002.
 
39. J. J. Wu and C. F. Ho, 20-21 November 2009, A study on optimum parameters of a two-dof vibration absorber, Proceedings of the 26th National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C01-030.
 
40. J. J. Wu and Y. S. Pao, 20-21 November 2009, A study on the precision of a hard-bearing balancing machine, Proceedings of the 26th National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C01-031.
 
41. J. J. Wu and C. F. Ho, May 8 2009, Free vibration analyses of a hybrid beam, Proceedings of the 11th National Conference on Undersea Technology, Keelung, Taiwan, pp. 359-365.
 
42. J. J. Wu and R. J. Chang, May 8 2009, Free vibration analyses of a rectangular plate carrying multiple elastic mounted attachments, Proceedings of the 11th National Conference on Undersea Technology, Keelung, Taiwan, pp. 383-388.
 
43. J. J. Wu and Y. H. Liu, May 8 2009, Use of scale model and scaling laws for torsional vibration analysis of a shafting system, Proceedings of the 11th National Conference on Undersea Technology, Keelung, Taiwan, pp. 389-396.
 
44. J. J. Wu and W. H. Tsai May 8 2009, Dynamic analyses of a portal frame structure, Proceedings of the 11th National Conference on Undersea Technology, Keelung, Taiwan, pp. 367-372.
 
45. J. J. Wu, C. F. Ho, Y. H. Liu and H. S. Chen, 7-8 March 2009, Dynamic responses of a beam composed of multiple elastic and rigid beam segments subjected to moving loads, Proceedings of the 21st National Conference on Naval Architecture and Marine Engineering, Kaohsiung, Taiwan, NSC 96-2628-E-022-001, pp. 107-110.
 
46. J. J. Wu and C. F. Ho, 28-29 November 2008, Dynamic analyses of a hybrid beam composed of rigid and elastic beam segments, The 32nd Conference on Theoretical and Applied Mechanics, Chiayi, Taiwan, Paper no. E004.
 
47. J. J. Wu and R. J. Chang, 28-29 November 2008, Dynamic analyses of a rectangular plate carrying multiple elastic-mounted attachments, The 32nd Conference on Theoretical and Applied Mechanics, Chiayi, Taiwan, Paper no. E002.
 
48. J. J. Wu, C. T. Yang and W. H. Tsai, 28-29 November 2008, Dynamic behaviour of a portal frame structure due to a moving load, The 32nd Conference on Theoretical and Applied Mechanics, Chiayi, Taiwan, Paper no. E011.
 
49. C. T. Yang , J. J. Wu and L. J. Huang, November 21-22 2008, Identification of Multilayer um Thickness Thin-Film Residual Stress, Proceedings of the 25th National Conference on Mechanical Engineering, Taiwan, Paper no. E03-01.
 
50. J. J. Wu and Y. H. Liu, November 21-22 2008, Torsional vibration analysis of a rotor-shaft system using its scale model and scaling laws, Proceedings of the 25th National Conference on Mechanical Engineering, Taiwan, Paper no. 0209.
 
51. J. J. Wu and C. F. Ho, November 21-22 2008, Free vibration analyses of a hybrid beam composed of multiple elastic beam segments and rigid beam segments, Proceedings of the 25th National Conference on Mechanical Engineering, Taiwan, Paper no. 0111.
 
52. J. J. Wu, C. T. Yang and R. J. Chang, November 21-22 2008, Free vibration analyses of a rectangular plate carrying multiple three-degree-of-freedom spring-mass systems, Proceedings of the 25th National Conference on Mechanical Engineering, Taiwan, Paper no. 0069.
 
53. J. J. Wu and W. H. Tsai, November 21-22 2008, Vibrations analyses of a frame structure due to a moving trolley, Proceedings of the 25th National Conference on Mechanical Engineering, Taiwan, Paper no. 0252.
 
54. J. J. Wu, 24 May 2008, Vibration analyses of a portal frame under the action of a moving distributed mass using moving mass element, 2008 Energy and Technology Forum, Kaohsiung, Taiwan.
 
55. J. J. Wu, 24 May 2008, Finite element modelling and experimental modal testing of a three-dimensional framework, 2008 Energy and Technology Forum, Kaohsiung, Taiwan.
 
56. J. J. Wu and S. J. Wang, 25 April 2008, Vibration analyses of a beam carrying multiple two-dof spring-mass systems with inertia effects of springs considered, Proceedings of the 10th National Conference on Undersea Technology, Kaohsiung, Taiwan, Paper no. E2, pp.345.
 
57. J. J. Wu and B. G. Yu, 25 April 2008, Dynamic behaviour of a beam mounted with a spring-mass system, Proceedings of the 10th National Conference on Undersea Technology, Kaohsiung, Taiwan, Paper no. E1, pp.331.
 
58. J. J. Wu and H. S. Chen, 25 April 2008, Lateral vibration analyses of a full-size rotor-bearing system by using those of its scale models, Proceedings of the 10th National Conference on Undersea Technology, Kaohsiung, Taiwan, Paper no. E1, pp.321.
 
59. J. J. Wu and K. N. Chang, 25 April 2008, Vibration analyses of rectangular plates subjected to moving line forces, Proceedings of the 10th National Conference on Undersea Technology, Kaohsiung, Taiwan, Paper no. E2, pp.357.
 
60. J. J. Wu, H. S. Chen, Y. C. Liang, H. Y. Sun, P. C. Cheng and C. F. Wang, 15-16 March 2008, Free vibration analysis of a beam with arbitrarily distributed rigid beam segments using elastic-and-rigid-combined beam element, Proceedings of the 20th National Conference on Naval Architecture and Marine Engineering, Taipei, Taiwan, NSC 95-2221-E-022-015.
 
61. J. J. Wu and S. J. Wang, 21-22 December 2007, Study on inertia effects of a two-dof spring-mass system attached to a beam, The 31st Conference on Theoretical and Applied Mechanics, Kaohsiung, Taiwan, Paper no. E19.
 
62. J. J. Wu and B. G. Yu, 21-22 December 2007, Vibration characteristics of a uniform beam carrying elastically mounted attachments, The 31st Conference on Theoretical and Applied Mechanics, Kaohsiung, Taiwan, Paper no. D14.
 
63. C. T. Yang and J. J. Wu, 21-22 December 2007, The application of two dimensional line-pulse ultrasonic waves propagation in dispersive media using pseudospectral chebyshev method, The 31st Conference on Theoretical and Applied Mechanics, Kaohsiung, Taiwan, Paper no. H08. 
 
64. J. J. Wu and K. N. Chang, 21-22 December 2007, Dynamic analysis of a beamplate subjected to moving loads, The 31st Conference on Theoretical and Applied Mechanics, Kaohsiung, Taiwan, Paper no. D13. 
 
65. J. J. Wu, H. T. Wu and H. S. Chen, 21-22 December 2007, Vibration analyses of a propulsive shafting system, The 31st Conference on Theoretical and Applied Mechanics, Kaohsiung, Taiwan, Paper no. H17. 
 
66. J. J. Wu, C. T. Yang and H. S. Chen, 21-22 December 2007, Scale modelling of a rotor-bearing system, The 31st Conference on Theoretical and Applied Mechanics, Kaohsiung, Taiwan, Paper no. F09. 
 
67. J. J. Wu and S. J. Wang, November 23-24 2007, Free vibration analyses of a beam carrying multiple two-dof spring-mass systems with inertia effect of the helical springs considered, Proceedings of the 24th National Conference on Mechanical Engineering, Taiwan, Paper no. C15-0002, pp. 3180-3185.
 
68. J. J. Wu and B. G. Yu, November 23-24 2007, A study on dynamic characteristics of a beam carrying an elastic-mounted attachment, Proceedings of the 24th National Conference on Mechanical Engineering, Taiwan, Paper no. C15-0003, pp. 3186-3191.
 
69. J. J. Wu and K. N. Chang, November 23-24 2007, Prediction of vibration characteristics of rectangular plates subjected to moving line loads from those of their equivalent beamplate models, Proceedings of the 24th National Conference on Mechanical Engineering, Taiwan, Paper no. C03-0024, pp. 2549-2553.
 
70. J. J. Wu, C. M. Huang and H. S. Chen, November 23-24 2007, Vibration reduction of a beam subjected to an external harmonic load, Proceedings of the 24th National Conference on Mechanical Engineering, Taiwan, Paper no. B11-0004, pp. 1570-1575. 
 
71. J. J. Wu, C. T. Yang and H. S. Chen, November 23-24 2007, Dynamic analyses of a rotor-bearing system, Proceedings of the 24th National Conference on Mechanical Engineering, NSC 94-2611-E-022 -002, Taiwan, Paper no. B11-0003, pp. 1564-1569.
 
72. J. J. Wu and H. Y. Sun, 16 June 2007, Torsional vibration analysis of a shafting system installed with multiple elastic-mounted rotors, Proceedings of the 15th National Conference on Vibration and Sound, Taipei, Taiwan, Paper no. C3.
 
73. J. J. Wu and P. C. Cheng, 16 June 2007, Experimental study on the dynamic characteristics of a full-size plate and a scale plate, Proceedings of the 15th National Conference on Vibration and Sound, Taipei, Taiwan, Paper no. C2.
 
74. J. J. Wu and Y. C. Liang, 16 June 2007, Vibration reduction of a damped structural system subjected to multiple external loadings, Proceedings of the 15th National Conference on Vibration and Sound, Taipei, Taiwan, Paper no. D13. (Outstanding Theoretical Paper Prize in Conference)
 
75. J. J. Wu and Y. C. Liang, 13 April 2007, Vibration reduction of a structural system using TLCD, Proceedings of the 9th National Conference on Undersea Technology, Taipei, Taiwan, pp. 188-197.
 
76. J. J. Wu, Y. C. Liang, U. C. Lin, M. W. Shen and S. S. Wu, 13 April 2007, Vibration characteristics of a beam carrying a two-dof spring-mass system, Proceedings of the 9th National Conference on Undersea Technology, Taipei, Taiwan, pp. 198-204.
 
77. J. J. Wu and C. F. Wang, 13 April 2007, Dynamic responses of a rotating system installed with an eccentric torsional damper, Proceedings of the 9th National Conference on Undersea Technology, Taipei, Taiwan, pp. 205-213.
 
78. J. J. Wu, C. F. Wang, K. C. Shi and G. S. Hu, 13 April 2007, Prediction of dynamic characteristics of a beam mounted with spring-mass systems from those of its equivalent model, Proceedings of the 9th National Conference on Undersea Technology, Taipei, Taiwan, pp. 214-222.
 
79. J. J. Wu and H. Y. Sun, 24-25 March 2007, Vibration analyses of a shafting system carrying any number of elastically mounted rotors, Proceedings of the 19th National Conference on Naval Architecture and Marine Engineering, Kaohsiung, Taiwan, Paper no. A35.
 
80. J. J. Wu and Y. C. Liang, 24-25 March 2007, Use of tuned liquid column damper for vibration reduction of a multi-degree-of-freedom spring-mass main system, Proceedings of the 19th National Conference on Naval Architecture and Marine Engineering, Kaohsiung, Taiwan, Paper no. A33.
 
81. J. J. Wu, Y. C. Liang, H. Y. Sun, P. C. Cheng and C. F. Wang, 24-25 March 2007, Prediction of the lateral vibration characteristics of a full-size rotor-bearing system from those of its scale models, Proceedings of the 19th National Conference on Naval Architecture and Marine Engineering, Kaohsiung, Taiwan, NSC 94-2611-E-022 -002, Paper no. A34.
 
82. J. J. Wu and Y. C. Liang, 15-16 December 2006, Vibration reduction of a spring-mass main system using tuned liquid column damper, The 30th Conference on Theoretical and Applied Mechanics, Zhanghua, Taiwan, Paper no. H4-1.
 
83. J. J. Wu and P. C. Cheng, 15-16 December 2006, Dynamic analyses of a full-size plate and a scale plate subjected to external loadings, The 30th Conference on Theoretical and Applied Mechanics, Zhanghua, Taiwan, Paper no. E2-4.
 
84. J. J. Wu and H. Y. Sun, 15-16 December 2006, Free vibration analysis of a shaft installed with multiple elastic-mounted rotors, The 30th Conference on Theoretical and Applied Mechanics, Zhanghua, Taiwan, Paper no. H4-4, NSC 93-2611-E-022-005.
 
85. J. J. Wu and C. F. Wang, 15-16 December 2006, Free vibration analyses of a beam carrying any number of spring-mass systems by means of equivalent-spring method and equivalent-mass method, The 30th Conference on Theoretical and Applied Mechanics, Zhanghua, Taiwan, Paper no. D1-3.
 
86. J. J. Wu and C. F. Wang, 24-25 November 2006, A study on vibration reduction effectiveness of eccentric torsional damper, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C5-001.
 
87. J. J. Wu and C. F. Wang, 24-25 November 2006, Prediction of dynamic characteristics of a beam mounted with spring-mass systems from those of its equivalent model, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C3-033.
 
88. J. J. Wu, P. C. Ni, F. T. Lin and H. T. Wu, 24-25 November 2006, Use of matrix condensation technique for static analyses of structures due to external loads, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C2-025.
 
89. J. J. Wu, P. C. Ni, F. T. Lin and H. T. Wu, 24-25 November 2006, Use of optimization technique to predict the deflection behaviour of a shaft due to unknown external loads, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C13-006.
 
90. J. J. Wu and Y. C. Liang, 24-25 November 2006, Parametric study of a tuned liquid column damper, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C13-001.
 
91. J. J. Wu and Y. C. Liang, 24-25 November 2006, Free vibration analysis of a beam carrying multiple two-dof spring-mass systems using its equivalent model, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C14-002.
 
92. J. J. Wu, P. C. Cheng and M. H. Cheng, 24-25 November 2006, Design of scale models of a flat plate due to dynamic loads, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, NSC-92-2611-E-022-002, Paper no. C10-002.
 
93. J. J. Wu and P. C. Cheng, 24-25 November 2006, Dynamic analysis of a rectangular flat plate subjected to a moving line load, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, NSC-91-2611-E-022-002, Paper no. C9-006.
 
94. J. J. Wu and H. Y. Sun, 24-25 November 2006, Evaluation of torsional vibration characteristics of a shaft carrying multiple elastically mounted rotors by using its equivalent longitudinal vibration system, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, NSC-93-2611-E-022-005, Paper no. C14-008.
 
95. J. J. Wu and H. Y. Sun, 24-25 November 2006, Optimal parameters for longitudinal and torsional vibration absorbers, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C3-015.
 
96. J. J. Wu and Y. C. Chao, 24-25 November 2006, Dynamic analysis of a vibration platform, Proceedings of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan, Paper no. C3-013. 
 
97. J. J. Wu and C. F. Wang, 10 June 2006, Vibration reduction of a rotating system using an eccentric torsional damper, Proceedings of the 14th National Conference on Vibration and Sound, Ilan, Taiwan, Paper no. C2.
 
98. J. J. Wu and Y. S. Hsu, 10 June 2006, Vibration suppression of a plate due to dynamic loads using tuned mass dampers, Proceedings of the 14th National Conference on Vibration and Sound, Ilan, Taiwan, Paper no. C3.
 
99. J. J. Wu and Y. C. Liang, 10 June 2006, Vibration analyses of a beam carrying multiple two degree-of-freedom spring-mass systems, Proceedings of the 14th National Conference on Vibration and Sound, Ilan, Taiwan, Paper no. C4.
 
100. J. J. Wu and J. F. Wu, 10 June 2006, Torsional-and-lateral-coupled vibrations of a shafting system induced by multiple eccentric concentrated masses, Proceedings of the 14th National Conference on Vibration and Sound, Ilan, Taiwan , Paper no. C5.
 
101. J. J. Wu and J. F. Wu, 31 March 2006, Vibration analyses of a rotating shaft installed with an eccentric propeller, Proceedings of the 8th National Conference on Undersea Technology, Taipei, Taiwan, pp. 31-38.
 
102. J. J. Wu, C. H. Hsieh and K. S. Wang, 31 March 2006, Vibration testing of a cantilever beam carrying a spring-mass system using equivalent mass method, Proceedings of the 8th National Conference on Undersea Technology, Taipei, Taiwan, pp. 133-139.
 
103. J. J. Wu, P. C. Ni, F. T. Lin and H. T. Wu, 31 March 2006, Use of deflection variation of a shaft to predict its deformation behaviour, Proceedings of the 8th National Conference on Undersea Technology, Taipei, Taiwan, pp. 297-303.
 
104. J. J. Wu and P. C. Cheng, 31 March 2006, Use of scaling laws for predicting the dynamic responses of a full-size plate due to dynamic loads from those of its scale model, Proceedings of the 8th National Conference on Undersea Technology, Taipei, Taiwan, 304-310.
 
105. J. J. Wu, S. M. Shyu and C. F. Wang, 31 March 2006, Dynamic responses of a rotating system installed with an eccentric torsional damper, Proceedings of the 8th National Conference on Undersea Technology, Taipei, Taiwan, pp. 311-316.
 
106. J. J. Wu and Y. S. Hsu, 18-19 March 2006, Vibration reduction of a beam subjected to an external harmonic load by means of multiple tuned mass dampers, Proceedings of the 18th National Conference on Naval Architecture and Marine Engineering, Keelung, Taiwan, Paper no. C10.
 
107. J. J. Wu and Y. C. Liang, 18-19 March 2006, Dynamic characteristics of a spring-mass system carrying a tuned liquid column damper, Proceedings of the 18th National Conference on Naval Architecture and Marine Engineering, Keelung, Taiwan, Paper no. C11.
 
108. J. J. Wu, H. Y. Sun and Y. S. Hsu, 18-19 March 2006, Use of longitudinal vibration theory for predicting the torsional dynamic characteristics of a rotating shaft carrying multiple elastically mounted rotors, Proceedings of the 18th National Conference on Naval Architecture and Marine Engineering, Keelung, Taiwan, Paper no. P43, NSC 93-2611-E-022-005.
 
109. J. J. Wu and J. F. Wu, 16-17 December 2005, Coupled torsional-and-lateral vibrations of a propulsive shafting system induced by eccentric propellers, The 29th Conference on Theoretical and Applied Mechanics, Hsinchu, Taiwan, Paper no. H007.
 
110. J. J. Wu, C. M. Huang and H. Y. Sun, 16-17 December 2005, A study on vibration reduction of torsional vibration systems, The 29th Conference on Theoretical and Applied Mechanics, Hsinchu, Taiwan, Paper no. H008.
 
111. J. J. Wu and Y. S. Hsu, 16-17 December 2005, Use of multiple tuned mass dampers for suppressing the vibration responses of a structure, The 29th Conference on Theoretical and Applied Mechanics, Hsinchu, Taiwan, Paper no. H031.
 
112. J. J. Wu and Y. S. Hsu, 2 December 2005, Study on vibration reduction of an absorber composed of two tuned mass dampers, The 8th Conference on Mechanism and Machine Design, Taipei, Taiwan, Paper no. C06001, pp. 492-497.
 
113. J. J. Wu and Y. S. Hsu, 25-26 November 2005, Vibration reduction of a simple structure using dual tuned mass damper, Proceedings of the 22nd National Conference on Mechanical Engineering, Jhonglii, Taiwan, Paper no. C1-001.
 
114. J. J. Wu, C. M. Huang and C. F. Wang, 25-26 November 2005, Use of a torsional damper for suppressing the torsional vibration responses of a shafting system, Proceedings of the 22nd National Conference on Mechanical Engineering, Jhonglii, Taiwan, Paper no. C1-002.
 
115. J. J. Wu and H. T. Wu, 25-26 November 2005, Use of enhanced Holzer method for calculating the natural frequencies and mode shapes of a shafting system with mass moment of inertia of the shaft considered, Proceedings of the 22nd National Conference on Mechanical Engineering, Jhonglii, Taiwan, Paper no. C3-013.
 
116. J. J. Wu and H. T. Wu, 25-26 November 2005, Torsional vibration analysis and measurement of a propulsive shafting system, Proceedings of the 22nd National Conference on Mechanical Engineering, Jhonglii, Taiwan, Paper no. C3-015.
 
117. J. J. Wu, J. F. Wu and K. S. Wang, 25-26 November 2005, Order analysis and modal testing of a shafting system, Proceedings of the 22nd National Conference on Mechanical Engineering, Jhonglii, Taiwan, Paper no. C14-006.
 
118. J. J. Wu and C. M. Huang, 3 June 2005, A study on optimum absorber parameters with inertia effect of the spring considered, Proceedings of the 13th National Conference on Vibration and Sound, Zhanghua, Taiwan, Paper no. C2.
 
119. J. J. Wu and C. H. Hsieh, 3 June 2005, Dynamic analysis of a beam carrying multiple single degree-of-freedom spring-mass systems, Proceedings of the 13th National Conference on Vibration and Sound, Zhanghua, Taiwan, Paper no. C3.
 
120. J. J. Wu and C. M. Huang, 15 April 2005, Vibration reduction of a flat plate due to dynamic loads using vibration absorbers, Proceedings of the 7th National Conference on Undersea Technology, pp. 300-308.
 
121. J. J. Wu, C. H. Hsieh and C. M. Huang, 19-20 March 2005, Use of complete-similitude scale plate model for predicting the dynamic characteristics of the full-size elastically supported flat plate due to dynamic loads, Proceedings of the 17th National Conference on Naval Architecture and Marine Engineering, Taipei, Taiwan, Paper no. NSC34, NSC 92-2611-E-022-002.
 
122. J. J. Wu and C. M. Huang, 3-4 December 2004, Vibration reduction of beams due to dynamic loads, The 28th Conference on Theoretical and Applied Mechanics, Taipei, Taiwan, pp. 2307-2314.
 
123. J. J. Wu and C. H. Hsieh, 3-4 December 2004, Use of equivalent-mass method for free vibration analysis of a beam carrying multiple single degree-of-freedom spring-mass systems, The 28th Conference on Theoretical and Applied Mechanics, Taipei, Taiwan, pp. 2087-2094.
 
124. J. J. Wu, S. Y. Hu and H. T. Wu, 26-27 November 2004, Torsional vibration analyses of a shafting system using Holzer tabulation method, Proceedings of the 21st National Conference on Mechanical Engineering, Kaohsiung, Taiwan, Vol. C1, pp. 2341-2346.
 
125. J. J. Wu, C. R. Lin and Y. S. Hsu, 26-27 November 2004, Animation of the mode shapes of a three-dimensional framework, Proceedings of the 21st National Conference on Mechanical Engineering, Kaohsiung, Taiwan, Vol. C2, pp. 2859-2864.
 
126. J. J. Wu and C. M. Huang, 26-27 November 2004, A study on the optimization of vibration absorbers, Proceedings of the 21st National Conference on Mechanical Engineering, Kaohsiung, Taiwan, Vol. C1, pp. 2335-2340.
 
127. J. J. Wu, C. U. Yang and L. L. Shi, 5-6 March 2004, Use of scale beams and scaling laws for the dynamic analysis of rectangular plates undergoing moving line forces, Proceedings of the 16th National Conference on Naval Architecture and Marine Engineering, pp. 528-532, NSC 91-2611-E-022-002.
 
128. J. J. Wu, 5-6 December 2003, Study on the dynamic characteristics of uniform beams carrying multiple two-dof spring-mass systems by finite element methods, Proceedings of the 20th National Conference on Mechanical Engineering, Taipei, Taiwan, Vol. C, pp. 433-440.
 
129. J. J. Wu, 29-30 November 2002, Use of vibration absorbers for controlling the dynamic responses of a beam subjected to a moving load, Proceedings of the 19th National Conference on Mechanical Engineering, Yulin, Taiwan, Vol. 3, pp. 459-466.
 
130. J. J. Wu, 15-16 March 2002, Integration of an experimental crane model, computer hardware and graphical user interface, 2002 Automatic Control Conference, Tainan, Taiwan, pp. 525-528.
 
C. 專書及專書論文(Books and Thesis):
1. J. J. Wu, 2016, Vibrations, 2nd Edition, New Wun Chin Developmental Publishing Co., Ltd, Taiwan. (中文書名:振動學,第二版,文京圖書股份有限公司,412頁,ISBN: 978-986-430-225-3)
 
2. C. H. Lien, J. J. Wu, I. Penesis, H. Sniegocki and W. J. Chang, 2013, Marine Engineering and Applications, Mathematical Problems in Engineering, Hindawi Publishing Corporation, USA. (ISSN:1024-123X)
 
3. J. J. Wu, 2012, Proceedings of the 2012 Cross-Strait Conference on Communication, Navigation and Ocean Technology, College of Maritime, National Kaohsiung Marine University, Taiwan. (181頁,ISBN:978-986-03-3490-6)
 
4. J. J. Wu and C. L. Kuo, 2011, Proceedings of the 3rd Cross-Strait Conference on Ocean Engineering and Maritime Technology 2011, College of Maritime, National Kaohsiung Marine University, Taiwan. (391頁,ISBN:978-986-02-9409-5)
 
5. J. J. Wu, 2010, Proceedings of 2010 Cross-Strait Conference on Marine Technology and Port Logistics Development , College of Maritime, National Kaohsiung Marine University, Taiwan. (296頁,ISBN:978-986-02-2899-1)
 
6. J. J. Wu, 2009, Proceedings of International Symposium on Marine Science and Technology 2009, College of Maritime, National Kaohsiung Marine University, Taiwan. (270頁,ISBN: 978-986-02-0115-4)
 
7. J. J. Wu, 2006, Vibrations, 1st Edition, New Wun Chin Developmental Publishing Co., Ltd, Taiwan. (中文書名:振動學,第一版,文京圖書股份有限公司,412頁,ISBN: 9861505156)
 
8. J. J. Wu and C. M. Huang, 2006, Finite Element Structural Analysis with MSC.FEA (MSC.Patran+MSC.Nastran): Fundamentals and Case Studies, 1st Edition, Chwa Technology Ltd, Taiwan. (中文書名:MSC.FEA (MSC.Patran+MSC.Nastran) 有限元素結構分析:基礎與實例演練,第一版,全華科技圖書股份有限公司,552頁,ISBN: 9572155229) 
 
9. J. J. Wu, 2000, An analysis of the structural dynamics of a mobile gantry crane with application to automation of container management, Ph.D. Thesis, Department of Mechanical Engineering, University of Glasgow, UK.